Engineering reference
Material guides, service specification sheets, and product catalogues. Every document on this page is drawn from verified Santoo capability data. Entries marked Pending are in preparation and will be published as client data is confirmed.
Material reference
4Seal material selection for GCC industrial conditions
NBR, FKM, EPDM, FFKM, PTFE — operating temperature ranges, media compatibility, and how GCC ambient conditions affect compound selection.
Read guideHydraulic seal profile reference — rod, piston, wiper, buffer
Functional comparison of hydraulic seal profiles. Profile selection by application, bore pressure, and operating conditions.
Read guideElastomer compound data — temperature and media ratings
Shore A hardness grades, continuous service temperature ranges, and pressure ratings by compound. Full table pending client input.
Chemical resistance quick reference
Elastomer compatibility with common GCC process media — petroleum oils, H₂S, seawater, caustic soda, cement slurry.
Service specification sheets
5Cylinder honing — capability specification
50–900 mm bore, ±2 µm tolerance, up to 16 m length. Auto taper correction. Digital process logging per work order.
View specRod and surface restoration — specification
Hard chrome 20–60 µm, surface finish Ra 0.2 µm, post-plating hardness 900–1100 HV. Maximum rod length 9,000 mm.
View specTest and verification bench — specification
700-bar pressure ceiling, 700-litre tank, SCADA-monitored. Separate pump test bench for vane, piston, and gear types.
View specNut busting — capability specification
Hydraulic reaction-arm method. Up to 60,000 Nm torque, Ø600 mm nut diameter, cylinders up to 12 tonnes supported.
View specCustom seal cutting — range and materials
Ø4–600 mm. Profiles: O-rings, U-cups, T-seals, X-rings, wipers, rod and piston seals. Materials: NBR, FKM, EPDM, PTFE, polyurethane.
View specCatalogues and downloads
2Hydraulic Services Capability Catalogue 2026
14 pages. Honing, rebuild, rod restoration, test and verification, nut busting, custom sealing. Workshop at KEZAD, Abu Dhabi.
Download PDFProduct Catalogue — Sealing Solutions
16 pages. O-rings, hydraulic sealing elements, gaskets, packing, carbon graphite components, springs, expansion solutions.
Download PDFNeed a document not listed here?
Certification documents, material data sheets, and calibration records are available to qualified procurement teams on request.